We offer complete solution to ensure that the condensate recovered to the boiler is pure & does not contain any contamination. The system monitors as well as takes necessary action to prevent contaminated condensate to get into the boiler feed tank.
In many process industries hot condensate is being drained due to the fear of Contamination as Contaminated Condensate is not recommended to be returned to the Boiler.
But if we can monitor the quality of condensate returned to the boiler online continuously & divert the same if necessary then we can save:
- Fuel by feeding the boiler with hot condensate
- Fresh Water charges & its chemical treatment cost as we are recycling the condensate
- Feeding pure form of water to the boiler which will lower down the blow down rate
- This will reduce the load on the ETP
How the system works
The condensate contamination d Monitoring & Control System, monitors and displays the TDS/Conductivity of the condensate. It automatically diverts the condensate to drain instead of back to the boiler if the TDS level rises above a pre-selected set point. When the conductivity drops, the condensate is allowed to return to the boiler. Thus minimizing heat and water wastage as well as avoiding the possibility of contaminating the feed water.
Key benefits
Ensure Optimal Performance and Maximum EfficiencyPrecise control of TDS/conductivity inhibits corrosion, solids precipitation and scale build-up.
Save Time: Copy the user settings from your controller to a USB flash stick and upload to a new controller. Programming your new controller this way can be accomplished in seconds. It's that simple!